Print Listing

Dwg Standard - 12 zone mold power cable
  • HBE24 single latch connector on tool end (female)
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg D-M-E?? MTC-12 standard - 12 zone thermocouple cable
  • HBE24 single latch connector on tool end (female)
  • One (1) cable required per twelve (12) zones
  • 20 foot (6.1 meter)


Dwg 11Mold-Masters?? stack mold - Combination power (12 zones) and stranded thermocouple (12 zones) Y cable
  • Stranded thermocouple wire, 3.5 inch bend radius, rubberized outer wrap
  • One (1) HBE48 single latch connector on tool end of Y cable (power = female 24 pin insert, thermocouple = male 24 pin insert)
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 12Mold-Masters?? stack mold - Combination power (12 zones) and stranded thermocouple (12 zones) Y cable
  • Stranded thermocouple wire, 3.5 inch bend radius, rubberized outer wrap
  • One (1) HBE48 single latch connector on tool end of Y cable (power = female 24 pin insert, thermocouple = male 24 pin insert)
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 13Mold-Masters?? stack mold - Combination power (12 zones) and stranded thermocouple (12 zones) Y cable
  • Stranded thermocouple wire, 3.5 inch bend radius, rubberized outer wrap
  • One (1) HBE48 single latch connector on tool end of Y cable (power = female 24 pin insert, thermocouple = male 24 pin insert)
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 30 foot (9.1 meter)


Dwg 18Powertech?? standard - Combination power (12 zones) and stranded thermocouple (12 zones)
  • LTC - Stranded thermocouple wire, 12 inch bend radius, Non-metalic liquid tight conduit
  • One (1) Modular dual latch connector on tool end of cable (power = female pins, thermocouple = male pins)
  • Connector rating: Module A,B,C = 10 amps | D,E = 20 amps | F,G = 1 amp (Thermocouples only)
  • One (1) cable required per twelve (12) zones
  • 20 foot (6.1 meter)


Dwg 19Powertech?? standard - Combination power (12 zones) and stranded thermocouple (12 zones)
  • LTC - Stranded thermocouple wire, 12 inch bend radius, Non-metalic liquid tight conduit
  • One (1) Modular dual latch connector on tool end of cable (power = female pins, thermocouple = male pins)
  • Connector rating: Module A,B,C = 10 amps | D,E = 20 amps | F,G = 1 amp (Thermocouples only)
  • One (1) cable required per twelve (12) zones
  • 20 foot (6.1 meter)


Dwg 20Powertech?? standard - Combination power (12 zones) and stranded thermocouple (12 zones)
  • LTC - Stranded thermocouple wire, 12 inch bend radius, Non-metalic liquid tight conduit
  • One (1) Modular dual latch connector on tool end of cable (power = female pins, thermocouple = male pins)
  • Connector rating: Module A,B,C = 10 amps | D,E = 20 amps | F,G = 1 amp (Thermocouples only)
  • One (1) cable required per twelve (12) zones
  • 20 foot (6.1 meter)


Dwg 23Flying leads on tool end of cable - standard
  • Combination power (12 zones) and solid core thermocouple (12 zones) cable
  • No tool end connector supplied on tool end
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 24Flying leads on tool end of cable - standard
  • Combination power (12 zones) and thermocouple (12 zones) cable
  • No tool end connector supplied on tool end
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 25D-M-E?? two (2) zone standard - Combination power (2 zones) and thermocouple (2 zones) cable
  • HBE 16 dual latch connector on controller end (male)
  • Two (2) HA4 single latch connectors on tool end (female)
  • Connector rating: 10 amps per zone
  • Stranded thermocouple and power power wire
  • One (1) cable required per two (2) zones
  • 15 foot (4.5 meter)


Dwg 26HBE10 two (2) zone standard - Combination power (2 zones) and thermocouple (2 zones) cable
  • HBE16 dual latch connector on controller end (male)
  • HBE10 dual latch connector on tool end (female)
  • Connector rating: 16 amps per zone
  • Solid core thermocouple wire, stranded power wire
  • One (1) cable required per two (2) zones
  • 20 foot (6.1 meter)


Dwg 27Standard - 12 zone mold power cable
  • HBE24 single latch connector on tool end (female)
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 30 foot (9.1 meter)


Dwg 28Standard - 12 zone mold thermocouple cable
  • HBE24 single latch connector on tool end (male)
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 29HBE 24 dual latch on tool end of cable - 12 zone mold power cable
  • HBE24 dual latch connector on tool end (female)
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 30 foot (9.1 meter)


Dwg 30HBE 24 dual latch on tool end of cable - 12 zone mold thermocouple cable
  • HBE24 dual latch connector on tool end (male)
  • One (1) cable required per twelve (12) zones
  • 20 foot (6.1 meter)


Dwg 30HBE 24 dual latch on tool end of cable - 12 zone mold thermocouple cable
  • HBE24 dual latch connector on tool end (male)
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 31D-M-E?? PIC 12G (MTC 5/8/12G compatible set) standard - 12 zone mold power cable
  • HD25 single latch connector on tool end (female)
  • Connector rating: 13 amps per zone
  • One (1) cable required per twelve (12) zones
  • 30 foot (9.1 meter)


Dwg 32D-M-E?? PIC12G (MTC 5/8/12G compatible set) standard - 12 zone mold power cable
  • HD25 single latch connector on tool end (female)
  • Connector rating: 13 amps per zone
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 33D-M-E?? MTC-12 standard - 12 zone thermocouple cable
  • HBE24 single latch connector on tool end (female)
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 41Flying leads on tool end of cable - Combination power (2 zones) and thermocouple (2 zones) cable
  • HBE16 dual latch connector on controller end (male)
  • No tool end connector supplied on tool end
  • Connector rating: 16 amps per zone
  • Stranded thermocouple and power wire
  • One (1) cable required per two (2) zones
  • 15 foot (4.5 meter)


Dwg 42Standard - 12 zone mold power cable
  • HBE24 single latch connector on tool end (female)
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 42Standard - 12 zone mold power cable
  • HBE24 single latch connector on tool end (female)
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 20 foot (6.1 meter)


Dwg 43Standard - 12 zone mold thermocouple cable
  • HBE24 single latch connector on tool end (male)
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 44Standard - 12 zone mold thermocouple cable
  • HBE24 single latch connector on tool end (male)
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 45D-M-E?? MTC-5 standard - 5 zone thermocouple cable
  • HBE10 single latch connector on tool end (female)
  • One (1) cable required per five (5) zones
  • Mostly used with 5 zone and under systems
  • 15 foot (4.5 meter)


Dwg 46D-M-E?? MTC-8 standard - 8 zone thermocouple cable
  • HBE16 single latch connector on tool end (female)
  • One (1) cable required per eight (8) zones
  • Mostly used with 8 zone and under systems
  • 15 foot (4.5 meter)


Dwg 47D-M-E?? PIC 12G (MTC 5/8/12G compatible set) standard - 12 zone mold power cable
  • HD25 single latch connector on tool end (female)
  • Connector rating: 13 amps per zone
  • One (1) cable required per twelve (12) zones
  • 30 foot (9.1 meter)


Dwg 47D-M-E?? MTC-12 standard - 12 zone thermocouple cable
  • HBE24 single latch connector on tool end (female)
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 48HBE 24 dual latch on tool end of cable - 12 zone mold thermocouple cable
  • HBE24 dual latch connector on tool end (male)
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 49HBE 16 single latch on tool end of cable - 8 zone mold power cable
  • HBE16 single latch connector on tool end (female)
  • Connector rating: 16 amps per zone
  • One (1) cable required per eight (8) zones
  • Mostly used with 8 zone and under systems
  • 30 foot (9.1 meter)


Dwg 50HBE 16 single latch on tool end of cable - 8 zone mold thermocouple cable
  • HBE16 single latch connector on tool end (male)
  • One (1) cable required per eight (8) zones
  • Mostly used with 8 zone and under systems
  • 15 foot (4.5 meter)


Dwg 51HBE 16 single latch on tool end of cable - 8 zone mold power cable
  • HBE16 single latch connector on tool end (female)
  • Connector rating: 16 amps per zone
  • One (1) cable required per eight (8) zones
  • Mostly used with 8 zone and under systems
  • 15 foot (4.5 meter)


Dwg 52HBE 16 single latch on tool end of cable - 8 zone mold thermocouple cable
  • HBE16 single latch connector on tool end (male)
  • One (1) cable required per eight (8) zones
  • Mostly used with 8 zone and under systems
  • 15 foot (4.5 meter)


Dwg 53HBE 16 single latch on tool end of cable - 8 zone mold thermocouple cable
  • HBE16 single latch connector on tool end (male)
  • One (1) cable required per eight (8) zones
  • Mostly used with 8 zone and under systems
  • 15 foot (4.5 meter)


Dwg 54Flying leads on tool end of cable - 12 zone mold thermocouple cable
  • No tool end connector supplied on tool end
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 55Flying leads on tool end of cable - 12 zone mold power cable
  • No tool end connector supplied on tool end
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 30 foot (9.1 meter)


Dwg 56Flying leads on tool end of cable - 12 zone mold power cable
  • No tool end connector supplied on tool end
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 57Flying leads on tool end of cable - 12 zone mold thermocouple cable
  • No tool end connector supplied on tool end
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 58HBE 24 dual latch on tool end of cable - 12 zone mold power cable
  • HBE24 dual latch connector on tool end (female)
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 59HBE 24 dual latch on tool end of cable - 12 zone mold thermocouple cable
  • HBE24 dual latch connector on tool end (male)
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 60D-M-E?? MTC-5 standard - 5 zone thermocouple cable
  • HBE10 single latch connector on tool end (female)
  • One (1) cable required per five (5) zones
  • Mostly used with 5 zone and under systems
  • 15 foot (4.5 meter)


Dwg 61D-M-E?? MTC-5 standard - 5 zone thermocouple cable
  • HBE10 single latch connector on tool end (female)
  • One (1) cable required per five (5) zones
  • Mostly used with 5 zone and under systems
  • 15 foot (4.5 meter)


Dwg 62D-M-E?? MTC-8 standard - 8 zone thermocouple cable
  • HBE16 single latch connector on tool end (female)
  • One (1) cable required per eight (8) zones
  • Mostly used with 8 zone and under systems
  • 15 foot (4.5 meter)


Dwg 63D-M-E?? MTC-8 standard - 8 zone thermocouple cable
  • HBE16 single latch connector on tool end (female)
  • One (1) cable required per eight (8) zones
  • Mostly used with 8 zone and under systems
  • 15 foot (4.5 meter)


Dwg 64D-M-E?? MTC-12 standard - 12 zone thermocouple cable
  • HBE24 single latch connector on tool end (female)
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


Dwg 65D-M-E?? MTC-12 standard - 12 zone thermocouple cable
  • HBE24 single latch connector on tool end (female)
  • One (1) cable required per twelve (12) zones
  • 20 foot (6.1 meter)


Dwg 66Powertech?? standard - Combination power (12 zones) and stranded thermocouple (12 zones)
  • LTC - Stranded thermocouple wire, 12 inch bend radius, Non-metalic liquid tight conduit
  • One (1) Modular dual latch connector on tool end of cable (power = female pins, thermocouple = male pins)
  • Connector rating: Module A,B,C = 10 amps | D,E = 20 amps | F,G = 1 amp (Thermocouples only)
  • One (1) cable required per twelve (12) zones
  • 20 foot (6.1 meter)


Dwg 67HBE16 two (2) zone standard - Combination power (2 zones) and thermocouple (2 zones) cable
  • HBE16 dual latch connector on controller end (male)
  • HBE16 single latch connector on tool end (female)
  • Connector rating: 16 amps per zone
  • Stranded thermocouple and power wire
  • One (1) cable required per two (2) zones
  • 15 foot (4.5 meter)


Dwg 68HBE10 two (2) zone standard - Combination power (2 zones) and thermocouple (2 zones) cable
  • HBE16 dual latch connector on controller end (male)
  • HBE10 single latch connector on tool end (female)
  • Connector rating: 16 amps per zone
  • Stranded thermocouple and power wire
  • One (1) cable required per two (2) zones
  • 15 foot (4.5 meter)


Dwg 69HBE 16 dual latch on tool end of cable - 8 zone mold power cable
  • HBE16 dual latch connector on tool end (female)
  • Connector rating: 16 amps per zone
  • One (1) cable required per eight (8) zones
  • Mostly used with 8 zone and under systems
  • 15 foot (4.5 meter)


Dwg 70HBE 16 dual latch on tool end of cable - 8 zone mold thermocouple cable
  • HBE16 dual latch connector on tool end (male)
  • One (1) cable required per eight (8) zones
  • Mostly used with 8 zone and under systems
  • 15 foot (4.5 meter)


Dwg 71HBE24 two (2) zone standard - Combination power (2 zones) and thermocouple (2 zones) cable
  • HBE16 dual latch connector on controller end (male)
  • HBE24 single latch connector on tool end (female)
  • Connector rating: 16 amps per zone
  • Stranded thermocouple and power wire
  • One (1) cable required per two (2) zones
  • 15 foot (4.5 meter)


Dwg 74Yudo?? - 4 zone standard - Combination power (4 zones) and stranded thermocouple (4 zones) Y cable
  • Stranded thermocouple wire, 3.5 inch bend radius, rubberized outer wrap
  • One (1) HBE16 Harting single latch connector on tool end of Y cable
  • Connector rating: 16 amps per zone
  • One (1) cable required per four (4) zones
  • Mostly used with four (4) zone and under systems
  • 15 foot (4.5 meter)


Dwg 75Yudo?? - 6 zone standard - Combination power (6 zones) and stranded thermocouple (6 zones) Y cable
  • Stranded thermocouple wire, 3.5 inch bend radius, rubberized outer wrap
  • One (1) HBE24 Harting single latch connector on tool end of Y cable
  • Connector rating: 16 amps per zone
  • One (1) cable required per six (6) zones
  • Mostly used with six (6) zone and under systems
  • 15 foot (4.5 meter)


Dwg 76Yudo?? - 12 zone standard - Combination power (12 zones) and stranded thermocouple (12 zones) Y cable
  • Stranded thermocouple wire, 3.5 inch bend radius, rubberized outer wrap
  • Two (2) HBE24 Harting single latch connector on tool end of Y cable
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


.pdf

">Dwg

Flying leads on tool end of cable - standard
  • Combination power (12 zones) and solid core thermocouple (12 zones) cable
  • No tool end connector supplied on tool end
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)


23.pdf

">Dwg

23

Flying leads on tool end of cable - standard
  • Combination power (12 zones) and solid core thermocouple (12 zones) cable
  • No tool end connector supplied on tool end
  • Connector rating: 16 amps per zone
  • One (1) cable required per twelve (12) zones
  • 15 foot (4.5 meter)